Bose 131 Panduan Servis - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Servis untuk Sistem Pembicara Bose 131. Bose 131 7 halaman. Marine loudspeaker system
Juga untuk Bose 131: Panduan Pemilik (18 halaman), Panduan Pemilik (37 halaman), Panduan Pemilik (23 halaman), Panduan Servis (7 halaman), Manual (7 halaman)

Halaman Cetak

DISASSEMBLY/ASSEMBLY PROCEDURE

1. Driver Removal

Note: Numbers in parentheses correspond

to the callouts in Figure 1.

1.1 Remove the three screws (3) that

secure the driver to the enclosure (1).

1.2 Lift the driver (2) out of the enclosure.

1.3 Cut the two wires connected to the

driver as close to the terminals as possible

and remove the driver.

2. Driver Replacement

2.1 Connect the two wires to the driver's

terminals. The red wire connects to the +

terminal and the black wire connects to the

- terminal.

2.2 Secure the driver (2) to the enclosure

(1). Be sure to align the gasket to provide

an airtight seal.

2.3 Check the driver's response using the

test procedure in this manual.

Figure 1. Exploded View