Bose 33935 Panduan Pemilik - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Bose 33935. Bose 33935 40 halaman. Bose multimedia speakers owner's guide companion 3

Halaman Cetak

SING YOUR SPEAKER SYSTEM

Troubleshooting

Balancing tone for the sound you like

The acoustics of your room affects the sound you hear there. Upholstered furniture, carpets,

and drapes absorb sound, which can muffle the treble (high frequencies). Bare floors, walls,

and furniture have the opposite effect and can make the treble sound shrill.

A bass compensation control on the Acoustimass

you hear.

There are two ways to adjust the bass:

• Turn the control clockwise to increase or counterclockwise to decrease bass.

• Reposition the module. To increase bass, turn the front of the module toward a wall or other

nearby surface. To decrease bass, aim the front from the wall.

Problem

The speaker system does not

play

The speaker system sound!

seems distorted

One speaker does not perform

or sounds distorted

!"#$%&'()*%)+#,-*./01&2 2 34!5

Français

module enables you to balance the tones

What to do

• Make sure all connections are secure. (See "Making

connections" on page 8.)

• Check your speaker wires for damage or frays, which

can cause an open or short circuit.

• Be sure that the sound source is plugged in and !

playing at an audible volume.

• Make sure the power is on and the system is not

muted. The LED on the control pod should be green

when unmuted.

• If using a PC, check your sound card settings to make

sure the "Digital output only" setting is turned OFF.

This setting is typically found in the Options menu of

the volume control icon. This icon is usually located in

the lower right-hand corner of the Windows desktop.

• Decrease the volume of the sound source and

increase the speaker system volume using the control

pod.

• Check connections from the speakers, control pod,

and computer to the Acoustimass

"Making connections" on page 8.)

• Be sure the cable from the unheard speaker is firmly

inserted in the proper To Speaker jack on the module.

• Switch the connection of both speakers to jacks on

the rear of the Acoustimass module.

If this does not resolve the problem for the !

originally unheard speaker, this speaker may be

the cause. Contact Bose

- If the problem switches to the other speaker (the

one that previously performed) a defective output

channel on the sound source may be the cause.

Try a different source.

- If this does not resolve the problem, the Acousti-

mass module may be the cause. Contact Bose

Customer Service.

• Check balance levels on your sound source.

Español

English

module. (See

Customer Service.