Bose 601Series IV Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Bose 601Series IV. Bose 601Series IV 11 halaman. Direct/reflecting speaker system

Halaman Cetak

Checking the connections

For use in home theater

Check all the connections from the receiver to the left and right speakers. Make sure all the

wires are connected in phase (+ to + and – to –).

Correct any wiring problems before you plug in your receiver and turn it on.

CAUTION: 601

speakers incorporate an automatic protection circuit, which guards against

most kinds of damage from electrical stress or overload. This circuit activates at high volume

levels to reduce output, causing a slight decrease in volume. You may also notice light coming

from inside the speaker cabinet. This is normal operation and indicates that power input may

be exceeding safe levels. Sustained listening at these levels is not recommended.

Your speakers are fully compatible with all surround sound formats. They may be used as the

front left and right main speakers, or in larger more powerful systems as full-range surround

channel speakers.

For rear or surround speakers

For use as the rear or surround speakers, connect your speakers to the "Rear" or "Surround"

speaker outputs of the receiver or amplifier. For use with digital home theater systems, we

recommend trying both "Large" and "Small" settings to determine the best performance with

your receiver or amplifier. See your receiver owner's guide for any additional information or

instructions.

Setting your surround sound receiver or amplifier

After making the connections, you may try any additional surround sound modes that your

receiver may have. These modes may have different names depending on the manufacturer,

such as, ACTION, MOVIE, THEATER. Select the settings for music, movies or both that

sound best in your listening environment. See your receiver/amplifier owner's guide for addi-

tional information on selecting settings.

Setting Up