Bose Acoustimass 10 Series I Panduan Pemilik - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Bose Acoustimass 10 Series I. Bose Acoustimass 10 Series I 17 halaman. Series 2
Juga untuk Bose Acoustimass 10 Series I: Panduan Pemilik (18 halaman), Panduan Pemilik (25 halaman), Manual (17 halaman)
Halaman Cetak
SetfingUp
FigureS
Making cube speaker connec-
tions
10
)'
Note:
If
want to use other speaker cable or need to lengthen t,he supplied cables, call
Bose· customer service. See page 15 for descriptions of applicable accessories. The cus-
tomer service numbers can be found inside the back cover
Connect the Acoustimass® module to the center and front cube
speakers
Use the 20 foot (6 m) cable with three pairs of wires to connect the Acoustimass module to
the center and front cube speakers.
)'
Note: You ,:an use any cube array in any position.
1. Connect the wire pair marked CENTER to the cube array you have placed in the center
speaker position. Press the terminal tab on the back of each speaker. Then, insert the
marked wire into the red terminal and the plain wire into the black terminal. Release the tab
to secure the wires in place. See Figure 8.
2. Connect the wire pair marked RIGHT to the cube array you have placed in the right front
position (to the right of the TV as you face it) in the same way.
3. Connect the wire pair marked LEFT to the cube array you have placed in the left front
position (to the left of the TV as you face it).
o