Bose Acoustimass 15 Panduan Pemilik - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Bose Acoustimass 15. Bose Acoustimass 15 18 halaman. Bose owner's manual home entertainment speaker systems acoustimass 15 series ii, acoustimass 16
Juga untuk Bose Acoustimass 15: Panduan Pemilik (18 halaman), Panduan Pemilik (16 halaman)
Halaman Cetak
Troubleshooting
Problem
System does not function
at all
No sound
No sound from cube
speaker arrays
Sound is distorted
No bass
Not enough or too much
bass
No surround sound
Customer service
If you have a problem with your Acoustimass
and try the following solutions. If you still have a problem, contact your Bose
arrange for service. To contact Bose directly, refer to the list of service offices and phone
numbers enclosed in the shipping carton.
What to do
• Make sure the receiver and powered Acoustimass module are plugged into an operating
AC wall outlet and that the receiver is turned on.
• Be sure to select a source at the receiver (video, CD, DVD, tuner).
• Check the speaker connections.
• Make sure that the powered Acoustimass module is plugged in.
• For digital sound, be sure a coaxial or optical cable connects the digital output of the
DVD player with the digital input on your receiver.
• Be sure the audio source selected is correct. For example, select DVD audio on your
receiver and player for DVD sound.
• Disconnect any headphones.
• Increase the volume.
• Be sure the powered Acoustimass module is plugged in and the receiver is turned on.
• Make sure speaker wire is not damaged.
• Reduce the volume of external components connected to the receiver.
• Be sure the speaker connections at the receiver/amplifier are correct (+ to + and – to –).
• Move the powered Acoustimass module closer to a wall or corner to increase bass.
Move it farther away from a wall or corner to decrease bass.
• Adjust the LFE Level or Room Compensation control.
• Be sure your receiver is processing a signal from a Hi-Fi VCR, stereo TV, laserdisc, or
DVD player, or other surround-sound source.
• If you are using the Dolby Pro-Logic mode, check that surround-sound is turned on.
• If you are using digital programming, verify that the settings are correct at the receiver.
• Be sure the source material (DVD, laser disc, or broadcast programming) is Dolby Digital
encoded.
For additional help in solving problems, contact Bose customer service. See the list of service
offices and phone numbers enclosed in the shipping carton.
AM264924_00 _V.pdf • August 13, 2002
®
speaker system, turn off your sound source
Reference
®
dealer to
15