Bose Acoustimass16 Series II Panduan Pemilik - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Bose Acoustimass16 Series II. Bose Acoustimass16 Series II 24 halaman. Home entertainment speaker system
Juga untuk Bose Acoustimass16 Series II: Panduan Pemilik (15 halaman)
Halaman Cetak
English
Español
Troubleshooting
Problem
System does not function
at all
No sound
No surround sound
No bass
Not enough or too much
bass
Sound is distorted
Customer service
Cleaning the speakers
Français
If you have a problem with your Acoustimass
and try the following solutions. If you still have a problem, contact your Bose
arrange for service. To contact Bose directly, refer to the address list included in the carton.
What to do
• Make sure the receiver and powered Acoustimass module are plugged into an operating
AC outlet and that the receiver is plugged in and turned on.
• Be sure to select an audio source on the receiver (video, CD, DVD, tuner).
• Increase the volume.
• Disconnect any headphones.
• Check the speaker connections.
• Make sure that both the powered Acoustimass module and the receiver are plugged in.
• For digital sound, be sure a coaxial or optical cable connects the digital output of the
DVD player with the digital input on your receiver.
• Be sure the audio source selected is correct. For example, select DVD audio on your
receiver to hear the DVD sound.
• Make sure the source material contains surround sound.
• If you are using the Dolby Pro-Logic mode on your receiver, make sure surround sound
is turned on.
• Be sure the source material (DVD, laser disc, or broadcast programming) is Dolby Digital
encoded.
• Be sure your receiver is processing a signal from a Hi-Fi VCR, stereo TV, laserdisc, or
DVD player, or other surround sound source.
• If you are using digital programming, verify that the settings are correct at the receiver.
• Be sure the speaker connections from the receiver to the amplifier are in the correct
phase, red collared wired to red jack (+ to +).
• Move your Acoustimass module closer to a wall or corner to increase bass. Move it
farther from a wall or corner to decrease bass.
• Adjust the LFE level or Room Compensation control.
• Make sure your speaker wire is not damaged.
• Reduce the volume of external components connected to the receiver.
For additional help in solving problems, contact the Bose Customer Service office appropri-
ate to your area. See the address list included in the carton.
The cabinets of your Acoustimass speaker system may be cleaned only with a soft dry cloth.
Do not use any sprays near the system or allow liquids to spill into any openings. Also, do not
use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
The grille assemblies on the cube arrays may be carefully vacuumed, if necessary. Please
note that the drivers are located directly behind the grille cloth and are easily damaged if
reasonable care is not taken.
®
speaker system, turn off your sound source
R
EFERENCE
®
dealer to
13