ABSCO SHEDS CPSN2 Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Tenda ABSCO SHEDS CPSN2. ABSCO SHEDS CPSN2 19 halaman. Skillion carport

ATTACHING LEGS AND ERECTING

NOTE: Minimum two people required for these

step.

REAR POSTS

Referring back to page 9 locate one M10 x 20

mm bolt and a nut with washers both sides at

each end of the cross beam and post assembly

to the predrilled pivot holes.

Only finger tighten these for now to allow the

sections to move when lifted.

With one person holding each post begin to

carefully lift the roof structure.

Continue lifting until a second bolt can be

fastened to the top bracket and edge beam.

Secure all four M10 x 20mm bolts with a nut and

washer both sides.

Absco Industries

Assembly Instruction Manual

ABSCO SKILLION CARPORT

MODEL: CPSN2

3.00mW x 5.50mD x 2.37mH

FRONT POSTS

Repeat these steps for the other cross beam

assembly.

Now go around and full tighten all nut and bolt

connections, including splice plate connections.

Take care to check the bolts securing the base

brackets, as access can now be awkward.

ANCHOR

Using the dimensions on the front page secure

the frame to the concrete slab with the 50mm

dynabolts provided.

Model: CPSN2

24/11/22