ABSCO SHEDS CPSN2 Manual - Halaman 8

Jelajahi secara online atau unduh pdf Manual untuk Tenda ABSCO SHEDS CPSN2. ABSCO SHEDS CPSN2 19 halaman. Skillion carport

EDGE BEAM ASSEMBLY

Mark a line 1355 mm in from each end of the side

beams. These are the positions for locating the

column top brackets, BKT07.

To make rainwater flow to the downpipe at the

rear of the carport, the rear posts are 50mm

shorter than the front.

Rear edge

flush with top

REAR

Mark these four hole positions of the BKT07 on

the beam and then drill 10 mm holes.

Absco Industries

Assembly Instruction Manual

ABSCO SKILLION CARPORT

MODEL: CPSN2

3.00mW x 5.50mD x 2.37mH

BKT07 R

6 mm

Front edge

inset

BKT07 L

Therefore to keep the posts vertical, the BKT07

need to be inset 6 mm at their front-most edge

as shown below.

Rear edge

flush with top

Don't fasten these brackets yet, just make the

holes for now.

Model: CPSN2

Make sure the side of the

BKT07 with these four holes

along the top edge are put

to the side beam.

FRONT

6 mm

Front edge

inset

24/11/22