ABSCO SHEDS CPSW41 Manual - Halaman 14

Jelajahi secara online atau unduh pdf Manual untuk Tenda ABSCO SHEDS CPSW41. ABSCO SHEDS CPSW41 18 halaman. Skillion carport

STEP 10

BEND THE ENDS OF 16 FLAT STRIPS (270mm X 25mm) AS

SHOWN AND SECURE AT MAXIMUM

1500mm CENTRES WITH ONE

SCREW AT EACH END.

DP-5

DP-2

DP-3

DP-1

DP-4

CUT A ROUND HOLE 51mm IN DIAMETER

IN ONE END OF THE REAR EDGE BEAM. THIS

CAN BE DONE BY DRILLING A SERIES OF 3mm HOLES

AND THEN PUNCHING OUT THAT SECTION. FIT THE GALVANISED GUTTER DROP AND SEAL WITH

SILICONE. FASTEN THE DOWNPIPES AND BENDS AS SHOWN. BEND THE 270 x 25 FLAT STRIPS

(DS) TO SHAPE AND FASTEN THE DOWNPIPE TO THE COLUMNS.

IMMEDIATE MAINTENANCE:

CLEAN DOWN ALL ROOF AND EDGE/CROSS BEAM INTERNAL AREAS. METAL FILINGS FROM

DRILLING HOLES AND USING SELF DRILLING SCREWS CAN CAUSE DISCOLORATION AND

CORROSION TO ROOF SHEETS AND GALVANIZED FRAMING SECTIONS.

ABSCO INDUSTRIES

Skillion Carport Model: CPSW33-41

ASSEMBLY INSTRUCTION MANUAL

Absco Industries

CARPORT MODEL: CPSW33-41

10-05-2018

PAGE 14