ABSCO SHEDS CPSW50 Panduan Perakitan & Instruksi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Perakitan & Instruksi untuk Tenda ABSCO SHEDS CPSW50. ABSCO SHEDS CPSW50 18 halaman. Skillion carport

STEP 5.

MARK THE POSITIONS FOR THE REMAINING CROSS BEAM ON THE

EDGE BEAMS.

REAR

890

JA-3

ABSCO INDUSTRIES

Skillion Carport Model: CPSW50

LEVEL SURFACE TO ATTACH ROOF SHEETS TO.

880

USING THE JA-3 JOINER ANGLE AS A TEMPLATE,

DRILL TWO 10mm HOLES IN EACH END OF THE

CROSS BEAM. SECURE TWO JA-3 JOINER ANGLES TO

EACH END OF THE CROSS BEAM WITH TWO M10 x 20mm

BOLTS, NUTS AND WASHERS. THE JOINER ANGLES

SHOULD BE FLUSH WITH THE TOP OF THE CROSS BEAM

TO ACHIEVE A LEVEL SURFACE TO ATTACH THE

ROOF SHEETS TO.

POSITION THE JOINER PLATE (JP) ON THE EDGE BEAM TO THE DIMENSIONS

SHOWN ABOVE, AND DRILL TWO 10mm HOLES IN THE EDGE BEAM. MOVE THE

JOINER PLATE TO THE INSIDE OF THE EDGE BEAM, TO ACT AS A LARGE

WASHER FOR THE BOLTS. SECURE THE CROSS BEAMS TO THE EDGE BEAMS

AS SHOWN BELOW WITH TWO M10 BOLTS,

NUTS AND WASHERS AT EACH END.

ASSEMBLY INSTRUCTION MANUAL

Absco Industries

880

5500

CARPORT MODEL: CPSW50

FRONT

890

10-05-2017

PAGE 10