Bose SMS118 Panduan Penggunaan dan Aplikasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Aplikasi untuk Sistem Pembicara Bose SMS118. Bose SMS118 28 halaman.

Halaman Cetak

SAFETY INFORMATION

Important Safety Instructions

Read these instructions.

Heed all warnings.

Do not use this apparatus near water.

Clean only with a dry cloth.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged

in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Visual Inspection and Maintenance of Components

Bose ShowMatch systems should be assembled, installed and suspended by expert, trained personnel who are

experienced in suspending loudspeaker systems of this type. Prior to suspending or mounting any loudspeaker

system, always inspect all components (suspension frames and hardware, enclosures, brackets, pins, eyebolts, etc.)

for corrosion, deformation, cracks or missing parts that could compromise the strength and safety of the loudspeaker

system being suspended. Do not suspend or mount the system until corrective action has been taken.

Installed systems should be regularly inspected to determine that load-bearing elements do not exhibit any condition

which may compromise the strength and safety of the suspended loudspeaker system, or as required by local

regulations.

The components used in suspending a ShowMatch system must be load rated for the intended use. Suspension

hardware can be obtained from industrial supply catalogs and specialized distributors. Hardware intended for overhead

use will comply with ASME B30.20 and will be manufactured according to product traceability procedures. Hardware of

this type will have a specified working load limit (WLL).

For all other materials used in the suspension of ShowMatch systems, refer to the hardware manufacturer's inspection

and maintenance guidelines.

Bose Professional is not responsible for the application of its products for any purpose, or the misuse of this

information. Furthermore, Bose Professional is not responsible for the conditions arising from avoiding regular

maintenance and inspections, or any other abuse condition.

Attachment to Structures

ShowMatch system installations should utilize a licensed Professional Engineer who is familiar with local building

and seismic codes as it applies to the suspension of objects from building structures. The hardware and methods of

installation must conform to the specifications of the Professional Engineer retained for the project. Failure to install

components in the manner specified may result in damage, injury or death.

Important Safety Instructions

Please read this installation guide carefully and save it for future reference.

This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic installation

and safety guidelines for this product in typical fixed-installation or portable-system applications. Please read this document and all safety warnings

before attempting installation.

WARNINGS:

All Bose products must be installed in accordance with local, state, federal and industry regulations. It is the installer's responsibility to

ensure installation of the loudspeakers and mounting system is performed in accordance with all applicable codes, including local building

codes and regulations. Consult the local authority having jurisdiction before installing this product.

Unsafe mounting or overhead suspension of any heavy load can result in serious injury or death, and property damage. It is the

responsibility of the installer to evaluate the reliability of any mounting method used for their application. Only professional installers with

the knowledge of proper hardware and safe mounting techniques should attempt to install any loudspeaker overhead.

CAUTION:

Installed loudspeaker arrays require regular inspection and routine maintenance to ensure proper function and

safe operation. Inspect mounting hardware and attachments for signs of corrosion, bending or any other condition that may decrease the

structural integrity. Immediately replace worn or damaged components.

Do not make unauthorized alterations to this product; doing so may compromise safety, regulatory compliance, system performance, and

may void the warranty.

Never exceed 24 ShowMatch full-range or 18 ShowMatch subwoofer modules using the integrated suspension system for arrays. Please

refer to product labels for Working Load Limit data.

Visual Inspection and Maintenance of Components

Bose ShowMatch systems should be assembled, installed and suspended by expert, trained personnel who are experienced in suspending

loudspeaker systems of this type. Prior to suspending or mounting any loudspeaker system, always inspect all components (suspension

frames and hardware, enclosures, brackets, pins, eyebolts, etc.) for corrosion, deformation, cracks or missing parts that could compromise

the strength and safety of the loudspeaker system being suspended. Do not suspend or mount the system until corrective action has

been taken.

Installed systems should be regularly inspected to determine that load-bearing elements do not exhibit any condition which may

compromise the strength and safety of the suspended loudspeaker system, frequency of inspection, or as required by local regulations.

The components used in suspending a ShowMatch system must be load rated for the intended use. Suspension hardware can be obtained

from industrial supply catalogs and specialized distributors. Hardware intended for overhead use will comply with ASME B30.20 and will be

manufactured according to product traceability procedures. Hardware of this type will have a specified working load limit (WLL).

For all other materials used in the suspension of ShowMatch systems, refer to the hardware manufacturer's inspection and maintenance

guidelines.

Bose Professional is not responsible for the application of its products for any purpose, or the misuse of this information. Furthermore,

Bose Professional is not responsible for the conditions arising from avoiding regular maintenance and inspections, or any other

abuse condition.

Attachment to Structures

ShowMatch system installations should utilize a licensed Professional Engineer who is familiar with local building and seismic codes as it

applies to the suspension of objects from building structures. The hardware and methods of installation must conform to the specifications

of the Professional Engineer retained for the project. Failure to install components in the manner specified may result in damage, injury

or death.

Note: Always use recommended software to confirm safe working load limits with exact array configurations, pitch angles, and connection points.

Guidelines for Installation and Setup of ShowMatch DeltaQ Array Module Loudspeakers

Installation information contained in this document is only a general guideline and cannot, as such, represent all requirements and precautions.

Accordingly, anyone using this material assumes all liability and is expressly responsible for the safety of all loudspeaker array designs and mounting

configurations applied in practice.

Prior to the installation or portable-system setup of any overhead loudspeaker, a licensed Professional Engineer must approve the location and method

of attachment to the building structure or support-truss structure and confirm they are consistent with all building codes and regulations. Ensure the

mounting surface and the method of attaching the loudspeaker system to the surface is capable of supporting the total weight of the system. A safety

factor of 10:1 is recommended.

Obtain all mounting system components from reputable manufacturers. Select a mounting system appropriate for your loudspeaker system and its

intended application. We recommend Bose mounting accessories when available. A licensed professional engineer must review the design and fabrication

of any custom mounting hardware.

Bose ShowMatch array module loudspeakers feature an integrated quick-pin suspension system, designed to facilitate loudspeaker array mounting by

professional installers. Module to module connections should be made using only the integrated suspension link-bars with the included or optional load-

rated "quick pin" fasteners. Unmarked (not rated for load bearing) fasteners should not be used.

Do not suspend loudspeaker using handles as attachment points. Handles are NOT designed for load bearing!

Use a safety cable, separately attached to the cabinet, at a point not in common with the load bearing attachment points of the mounting system to

the loudspeaker. This is recommended even if not required by local regulation. Consult a licensed Professional Engineer or a suspension professional for

proper design and installation.

Do not under any circumstances climb the array.

PRO.BOSE.COM