3M G5 Buletin Teknis - Halaman 10

Jelajahi secara online atau unduh pdf Buletin Teknis untuk Headset 3M G5. 3M G5 12 halaman. Drive-thru systems
Juga untuk 3M G5: Panduan Referensi Cepat (2 halaman), Buletin Teknis (6 halaman), Buletin Teknis (2 halaman), Manual (10 halaman), Panduan Memulai Cepat (3 halaman), Manual (8 halaman)

3M Graphics Warranties

3M™ Drive-Thru Systems

Power Up the G5 Basestation and Close the Basestation Cover

You may now power up the system by plugging in the Power Supply's barrel connector to the 12V input terminal on

the G5 Basestation, as illustrated:

To replace the basestation cover:

- Verify there are no obstructions (tools, etc.)

in the way of the cover being closed.

- Align the top edge of the cover with the

base.

- Swing the bottom half of the cover down

into place and gently push it against the

base until it locks into place.

- Tighten the two screws located at the

bottom of the cover.

In order to register headset(s) to the G5 Basestation, you will have to:

- Enter the Configuration mode on the Basestation

- Register headsets from the Registration option on the System Menu

Enter Configuration Mode

Configuration mode is a passcode-protected area that contains most of the configuration options for the G5

Basestation system. Using the access provided for users, it is possible to set up all of the functionality of the system.

To enter the configuration mode:

From the Run mode screen, enter your user passcode.

2. Press Mode. The display will show the user name and ID number

(e.g., Installer1ID = 1 or User1ID = 1)

3. Press Mode again and the system will display the Main Menu with options to select System Menu or Greeter

Menu.

4. Use keypad's arrow keys to navigate to System Menu and press Enter.

Technical Bulletin #161 Release B