Designating one video tuner
Figure 7
Designating the TV as video
tuner
Follow the process below:
Turn on your component. Turn on the TV and be sure to select the Video input on the TV for
the media center. Then using the LIFESTYLE
continue:
1. Identify the device:
• From the Remote Control options in the System menu, select
• Move to the right and up or down in the list to select a component by pressing
2. Identify the brand:
• In the menu options on the left, select
• Move to the right and up or down in the alphabetical list to locate your brand.
• Press Enter to select that brand.
3. Select the device code:
• From the menu options on the left, select
• Move right to select the first code.
• Press the Play or Channel/Track up button on the LIFESTYLE
If the component responds, press other buttons to make sure important functions on
the component also work. If the component does not respond, select a different code
and try again.
• When you have chosen the best code for your component, press the Enter button.
• Press the System or Exit button to leave the System menu.
If the LIFESTYLE
®
remote controls several video components, you can choose one of them
as the primary channel selector. This gets your channel tuning commands to your cable box,
even when TV or VCR is selected. You don't need to switch to CBL/SAT to change channels.
Note: For general guidelines on using the LIFESTYLE
adjustments" on page 29.
Make this selection from the Remote Control options in the System menu. In the
select one of your components. Then press the System or Exit button to leave the menu.
IR Control:
TV Tuner:
TV Brand:
TV Device Code:
VCR Brand:
Choose the one you want to control.
navigate
select
Controlling External Sources
®
remote control, press the AUX source button and
AUX Brand
AUX Device Code
®
Remote
Control
TV
VCR
CBL/SAT
.
AUX Device
.
.
®
remote control.
System menu, refer to "Making system
Enter.
list,
TV Tuner
23
Halaman Cetak