Bose Lifestyle 35 Series II Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Teater Rumah Bose Lifestyle 35 Series II. Bose Lifestyle 35 Series II 36 halaman. Noise cancelling
Juga untuk Bose Lifestyle 35 Series II: Panduan Instalasi (42 halaman), Panduan Pemilik (25 halaman), Panduan Pemilik (24 halaman), Panduan Pemilik (13 halaman), Panduan Pengaturan Cepat (3 halaman), Panduan Pengoperasian (46 halaman), Panduan Pemilik (36 halaman), Panduan Pemilik (32 halaman), Panduan Memulai Cepat (2 halaman), Reset Pabrik (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pemilik (38 halaman)

System Installation

Figure 7

Front features of the media

center

Connecting the speakers to the Acoustimass

Front door – Make sure you have

enough room to lift this door.

Disc tray – Make sure nothing blocks this

CD/DVD tray as it slides open.

CAUTION: Before you make any connections, be sure that the media center, the Acoustimass

module, and any additional equipment are not connected to AC power.

Your system may have Jewel Cube

connect, or cube array or single cube speakers (images B and C respectively,) which use a

two-wire cable. LIFESTYLE

Note: If your system has cube or cube array speakers, follow the instructions in "Making the

two-wire connections for cube or cube array speakers" on page 13.

The positive and negative wires of the plug-in cable are properly oriented for polarity and the

plug is designed to fit only one way into the jack.

1. Match the correct cable to the corresponding speaker location:

• Front speaker cables have blue RCA connectors on one end and speaker plugs at the

other end with L (left), R (right), or C (center) markings.

• Surround speaker cables have orange RCA connectors at one end and speaker plugs

at the other end with L (left) or R (right) markings.

The IR Emitter, which enables certain

remote control operation, is located here.

module

speakers (image A on the left), which use a plug-in cable

DVD systems include five speakers.

Display window – Make sure you can see

this information while using your system.