Bose lifestyle650 Panduan Pemilik - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Teater Rumah Bose lifestyle650. Bose lifestyle650 44 halaman.

Halaman Cetak

T R O U B L E S H O O T I N G

Symptom

No sound from the

system

Cannot complete

network setup

Cannot complete

SoundTouch® setup

Acoustimass® wireless

bass module status LED

is a solid amber (dim)

Bass is too heavy or low

3 0 - E N G L I S H

Solution

• Increase the volume.

• Press the Mute button

system is not muted.

• Make sure you have selected the correct source.

• Cycle through and test different sources.

• Make sure that the HDMI™ cable is inserted into a connector on

your TV labeled ARC or Audio Return Channel. If your TV does

not have an HDMI ARC connector, use a secondary audio cable in

addition to the HDMI cable.

• If using a secondary audio cable, insert the cable into a connector

on your TV labeled Output or OUT.

• Press and hold the Power button

cycle your system's power.

• Unplug the power cord for the console, wait 30 seconds and plug it

firmly into a live AC (mains) outlet.

• Select the correct network name and enter password

(case sensitive).

• Restart your modem and router.

• Connect to the network using an Ethernet cable.

• Connect the mobile device and the system to the same

Wi-Fi® network.

• Enable Wi-Fi on the mobile device you are using for setup.

• Test your internet connection.

• Restart your mobile device.

• Restart your modem and router.

• Uninstall the app, reinstall the app, reset the system and restart

setup.

• Follow the on-screen troubleshooting prompts.

• Press the

rerun the UNIFY

• Connect the bass module using a 3.5 mm stereo c able (see page

33). If you don't have a 3.5 mm stereo cable, contact Bose®

customer service. Refer to the contact sheet in the carton.

• Unplug the power cord for the Acoustimass, wait 30 seconds and

plug it firmly into a live AC (mains) outlet.

• Adjust the bass setting of the system (see page 17).

• Run ADAPTiQ® audio calibration (see page 14).

• Move the bass module away from nearby walls and corners.

on the remote control to make sure the

on the front of the console to

button on the control console or your remote and

setup (see page 14).