Bose Lifestyle Music Center Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem stereo Bose Lifestyle Music Center. Bose Lifestyle Music Center 38 halaman. Home entertainment systems with vs-2 video enhancer
Juga untuk Bose Lifestyle Music Center: Panduan Pengoperasian (48 halaman), Panduan Pengoperasian (48 halaman), Panduan Pemilik (19 halaman), Panduan Pemilik (29 halaman), Panduan Instalasi (44 halaman), Panduan Pemilik (42 halaman), Informasi Pengaturan (1 halaman), Panduan Pemilik (26 halaman), Panduan Ekspansi (38 halaman), Panduan Pengoperasian (42 halaman), Panduan Pengoperasian (48 halaman), Panduan Pengoperasian (46 halaman), Panduan Pemilik (12 halaman), Panduan Memulai Cepat (8 halaman), Panduan Instalasi (30 halaman), Panduan Instalasi (39 halaman)

ASIC

YSTEM

Figure 8

Making the plug-in cable

connection

ONNECTIONS

Each LIFESTYLE

DVD system includes five cube speakers.

Your system may feature Jewel Cube

type of cable connector. Or, you may have cube arrays or single cube speakers (images B

and C respectively), which use a two-wire cable for connections.

CAUTION: Before you make any connections, be sure that the media center, the Acoustimass

module, and any additional equipment are NOT connected to AC power.

Follow these instructions only if your system includes Jewel Cube speakers, shown as A on

the left. For connecting speakers B or C, skip to "B or C: Making two-wire connections for

cube or cube array speakers" on page 13.

The plug-in cable for your speakers fit only one way into the jack, which ensures proper

polarity (+ to + and – to –) connections.

1. Match each cable, according to its location marking, with the speaker placed in that

location:

• Front speaker cables have blue RCA connectors on one end and speaker plugs on the

other end with L (left), R (right), or C (center) markings.

• Surround speaker cables have orange RCA connectors on one end and speaker plugs

on the other end with L (left) or R (right) markings.

2. Orient the plug with its small knob up, so the plug slips easily into a notch on top of the

jack on the back of each speaker.

3. Insert the plug of each speaker cable fully into the jack on the rear of its respective

speaker.

4. Connect the RCA connector on the other end of each cable to the Acoustimass

as described on page 14.

Français

speakers (image A on the left), which use a plug-in

Español

English

module