ABSCO SHEDS ADPATIO6030 Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Furnitur Teras ABSCO SHEDS ADPATIO6030. ABSCO SHEDS ADPATIO6030 16 halaman. Signature patio 6.12m w x 3.11m d x up to 3.18m h

Halaman Cetak

SIDE FLASHING

6. Repeat these steps for the other side flashing.

Just remember to make the mirrored version.

Absco Industries

Assembly Instruction Manual

ABSCO SIGNATURE PATIO

MODEL: ADPATIO6030

6.12m W x 3.11m D x up to 3.18m H

RIGHT UNDERSIDE VIEW - beam not shown.

0. TR36 flashing may overhang roof panel at the

front and we'll need to trim to make the gutter fit

later.

NOTE: If the flashing is the same length as the

roof panel you don't need to trim the top.

1. Mark off where 'top skin' end is against the top

side of the flashing.

Then continue 30mm down the side.

2. Mark off where the 'Z' flashing is against the

bottom side of the flashing.

Then continue 40mm up the side.

3. On the side mark a line to join these points as

shown.

4. Take the flashing down off the roof and trim

using tinsnips (offcut shown in grey).

5. Refit and fasten using pop rivets FAST102 at

the locations shown.

Only on top, use teks with neoprene washers

FAST101.

Model: ADPATIO6030

21/09/23

1.0