ABSCO SHEDS ADPATIO6030 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Furnitur Teras ABSCO SHEDS ADPATIO6030. ABSCO SHEDS ADPATIO6030 16 halaman. Signature patio 6.12m w x 3.11m d x up to 3.18m h

Halaman Cetak

POSTS

Offcut

Absco Industries

Assembly Instruction Manual

ABSCO SIGNATURE PATIO

MODEL: ADPATIO6030

6.12m W x 3.11m D x up to 3.18m H

1. Now work out the height of the posts for the

standard 2 degree fall.

Take a measurement from foundation up to the

PT5

underside of the mounted receiver channel, let's

call this dimension 'x'. Then subtract 90 mm to

determine finished post height.

NOTE:

If height to underside of receiver channel is at

the maximum height, 3090 mm, do not trim

post. Instead go to step 3.

2. Take a post PT5 and mark all faces then safely

cut post to length. Consider sealing cut with

supplied paint.

BK3

3. Take a BK3 bracket and orientate as shown

and align so it's flush with the end and side of

the post.

4. Fasten with five FAST100 tek screws and

5/16" nut setter.

Make sure screws are inset 20 mm from the

edges of bracket for beam clearance.

To keep the parts aligned while fastening use a

clamp or visegrips.

This completes the left post

5. Make the right post by repeating these steps

but aligning and fixing the BK3 bracket as shown

below.

This completes the right post.

Model: ADPATIO6030

21/09/23

1.0