Absen CR1.2 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Absen CR1.2. Absen CR1.2 19 halaman.

4. Product Cabling

· Preparation before wiring

Before supplying power and signal source to the screen, please check power and data cables connections carefully

and make sure they are wired correctly. Use a multimeter to test the L, N and PE lines in AC power input port and

make sure the tree lines are not short-circuited.

· Power cable connection description

Calculate the maximum power consumption and make sure enough power will be provided. Please consult with your

electrician or power distro manufacturers for specific setup. Input voltage of cabinet is 100-240V/AC. 3X1.5mm2

power supply cable is used to connect the cabinets to the power distros. Maximum 16 cabinets per a 220V circuit,

and 8 cabinets per a 110V circuit..

· Cabinet data ports diagram:

Notes: Single-receiving-card cabinet has two RJ45 as video signal input and output, DATA2 does not need to be

utilized. Double receiving card cabinet have two RJ45 for both DATA1 and DATA2, each with two RJ45 ports used

as signal input and output.

- 13 -

DATA2：RJ45videosignalinput

DATA1：RJ45videosignal

Leading

LED

Applications

CR SeriesUserManual