Bose AHX-32-0 Panduan Pemilik - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Headset Bose AHX-32-0. Bose AHX-32-0 36 halaman. Bose aviation headset owner's guide
G
Y
H
ETTING
OUR
EADSET
Figure 10
Installing the two batteries
Preparing the aircraft powered headset for use
14
R
U
EADY FOR
SE
Inserting batteries
Insert the two supplied alkaline AA batteries (IEC LR6) into the
control module (Figure 10).
+
CAUTION: The battery compartment is designed to prevent inadvert-
ent reverse polarity from installing the batteries incorrectly. If the bat-
teries do not seem to fit correctly, do not force them in. Forcing an
improper connection will cause permanent damage to the control
module.
For an aircraft powered headset, the cable is permanently installed in
the aircraft.
CAUTION: The aircraft panel connector must be mounted by a
mechanic qualified to perform this type of avionics installation for the
aircraft you are using.
If yours is an aircraft powered headset, there is a connector on a 6-
foot wiring harness that came in the carton. This self-latching, preci-
sion designed quick-connector is designed for panel mounting and
mechanically keyed to ensure proper mating.
Attaching and removing the cable
When the quick-connector is installed, the cable leading from the
control module connects to it. Match the narrow bar on the cable
end to the slot on the connector. Press in until the two parts engage
(Figure 11 on page 15).
To release the cable, pull back on the sleeve near the end of the
cable. Then gently remove the cable from the connector.