Bose IN-EAR HEADPHONES Panduan Pemilik - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Headset Bose IN-EAR HEADPHONES. Bose IN-EAR HEADPHONES 6 halaman. Mobile in-ear headset
Juga untuk Bose IN-EAR HEADPHONES: Panduan Pemilik (8 halaman), Panduan Pemilik (2 halaman), Panduan Pemilik (8 halaman), Panduan Pemilik (21 halaman), Panduan Pemilik (18 halaman)
Halaman Cetak
Using the optional stability enhancement accessories
You may find the stability of the Bose
certain activities, such as exercise, when using either the supplied lanyard or
clothing clip. Either optional accessory will reduce some of the downward pull
from the cord and may be used separately or together.
Using the lanyard
1. Attach the headphone cord
through the right (R) and left
(L) lanyard connectors
approximately 10 inches
(25.4 cm) below each ear
piece.
Important: Make sure the L
and R marks point up toward
the ear pieces.
2. Pull the lanyard over your
head and allow it to rest
behind your neck
3. Fit the headphones into your
ears as described in the
headphone owners' guide.
4. Adjust the lanyard connectors
to make enough slack above the lanyard connectors so that any downward
pulls on the plug end of the cord are not felt in the ears.
Note: Lanyard has a built-in safety release that separates when forcefully pulled.
Using the clothing clip
1. Attach the headphone cord to
the connector on the back
side of the clip.
2. Attach the clip high up on
your shirt or collar, allowing
for slack above the clip.
3. Adjust clip position until there
is enough slack in the cord
above the clip that any
downward pulls on the plug
end of the cord are not felt in
the ears.
®
in-ear headphones is improved during
CORRECT
INCORRECT