Bose Lifestyle 35 Series II Panduan Pemilik - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Headset Bose Lifestyle 35 Series II. Bose Lifestyle 35 Series II 24 halaman. Noise cancelling
Juga untuk Bose Lifestyle 35 Series II: Panduan Instalasi (42 halaman), Panduan Instalasi (36 halaman), Panduan Pemilik (25 halaman), Panduan Pemilik (13 halaman), Panduan Pengaturan Cepat (3 halaman), Panduan Pengoperasian (46 halaman), Panduan Pemilik (36 halaman), Panduan Pemilik (32 halaman), Panduan Memulai Cepat (2 halaman), Reset Pabrik (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pemilik (38 halaman)

Halaman Cetak
Bose Lifestyle 35 Series II Panduan Pemilik
English
Cleaning
• Use only a soft, dry cloth to clean the outside of the VS-2.
• Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
• Do not allow liquids to spill into any openings.
• Do not use any sprays near the VS-2.

Troubleshooting

Problem
What to do
System will not turn on
•
Make sure the VS-2 cable is correctly connected between the VS-2 and the media center (see "Connecting the VS-2 to your media
center" on page 6).
•
Make sure the media center power supply is plugged into an AC receptacle.
No picture on TV
•
If you have not done so, load the software update disc into the DVD player. See "Updating the system software" on page 5.
•
Make sure the VS-2 cable is correctly connected between the VS-2 and the media center (see "Connecting the VS-2 to your media
center" on page 6).
•
Make sure you connected your TV to the TV output connector on the VS-2.
•
Make sure you have selected the correct video input on your TV.
The wrong picture appears
•
If you have not done so, load the software update disc into the DVD player. See "Updating the system software" on page 5.
on my TV for the source I
•
Make sure your sources are connected to the appropriate VS-2 inputs.
selected
•
Make sure the Serial Data plug from the VS-2 is fully inserted into the media center connector.
•
Make sure you have selected the correct video input on your TV.
Some sources do not
•
Make sure your sources are connected to the appropriate VS-2 inputs.
appear on my TV
•
Make sure you have not used a source that outputs a video format that is higher in quality than what your TV can accept.

Maintaining Your VS-2

21