Bose Lifestyle 35 Series II Panduan Pengoperasian - Halaman 39

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Headset Bose Lifestyle 35 Series II. Bose Lifestyle 35 Series II 46 halaman. Noise cancelling
Juga untuk Bose Lifestyle 35 Series II: Panduan Instalasi (42 halaman), Panduan Instalasi (36 halaman), Panduan Pemilik (25 halaman), Panduan Pemilik (24 halaman), Panduan Pemilik (13 halaman), Panduan Pengaturan Cepat (3 halaman), Panduan Pemilik (36 halaman), Panduan Pemilik (32 halaman), Panduan Memulai Cepat (2 halaman), Reset Pabrik (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pemilik (38 halaman)

Halaman Cetak

Bose Lifestyle 35 Series II Panduan Pengoperasian

English

Español

Figure 19

Miniature switches on the

Primary remote are set for

use in the Main room (A)

Français

Using the media center:

1. Lift the media center door and press the All Off button.

2. Press and hold the Store button. Your current house code will appear in the media center

display window in the form of four rectangles, which represent the positions of switches

1 through 4:

HOUSE CODE:

Switches 1 - 4 down = 0 0 0 0 (current house code)

3. While holding the Store button, press any button on the remote control.

The media center displays the new house code, which confirms its recognition of the

new code:

NEW HOUSE CODE:

(Switch 1 up, 2 down, 3 up, and 4 down = 1 0 1 0 (new house code)

4. Release the Store button. The system remains off.

5. If you have additional remote controls, change the switches to match those of the first

remote control by following steps 1-3 above. You do not need to repeat steps 4-5.

Note: To verify your system's house code, press Store while the system is off. The display con-

firms the settings of switches 1-4.

Switches (1-4)

As set at the factory:

all switches down.

EFERENCE

Other switches

Switch 5 determines which "audio

stream" (of two) you hear.

For more information on streams,

refer to "Setting up a second room

with sound" on page 40.

Switches 6-9 represent the room

where the remote will be used.

In the main room, the primary

remote is set as Room A with all

switches down.

For a Bose

link remote

in another room

Switches 1-4 need to match those

switch settings in your main remote.

Set switches 5-9 for the room where

you will use the Bose

link remote.