Absen K Series Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Absen K Series. Absen K Series 17 halaman.

Leading

LED

Applications

8.If only one USB or one serial port connecting computer to Nova controller system, the used serial port will

be automatically set as the current serial port. Otherwise, if multiple USB or serial ports are used to connect

control systems to the computer, the serial port that is used to connect the control system which is to be

configured should be set as the current serial port.

9.Click "Next">"Screen Config-Com?"Click "Sending Board", make sure the data of the sending card and the

computer video card are the same. Reset the data if their data are not the same. As shown in following

figure. Normally, default data is correct, no need re-set up.

10.Click "Save" after confirm the data Switch to the Scan Board page as bellowing figure, load file > Send To

HW > Save

11.Click "Screen Connection"

User Manual

K series

- 14 -