AirTek NFT28U Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pengontrol AirTek NFT28U. AirTek NFT28U 2 halaman. Field control layer device group control touch panel
Juga untuk AirTek NFT28U: Panduan Memulai Cepat (2 halaman)

Halaman Cetak

【Installation】

A single gang electrical box (Box) soul be reserved when mounted on the wall, in order to get enough space for the device cable,



can be mounted horizontally or vertically.

With hot-swappable design, PLUGI-IN terminals for easy adjustment test.



Recommended AWG22 four core shielded cable, and EMT pipe configuration in order to achieve better communication results.



Use computer software to perform BACsoft. Use USB2.0 and Mini USB conversion cable to link NFT28U with Micro USB port



(Figure 3) to set the data, update firmware and download the graphic control interface data

Installations needed to avoid dust, condensation and other environmental factors, damage to the product.



Connect in accord to

diagram

Fig-1 Installation diagram

【Wiring Diagram】

【Dimensions】Unit：mm

Please refer to

http://www.airtekgroup.com

for the most resent update information.

Fig-2 Dismount diagram

Mini

USB

BL Y

R G

M+ M-

V+ V-

MODBUS

12VDC

22AWG

Twisted pair

shield cable

Fig-3 Connection