DROMEAS Alma HT Panduan Petunjuk Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Perabotan Dalam Ruangan DROMEAS Alma HT. DROMEAS Alma HT 12 halaman. Working desk
Juga untuk DROMEAS Alma HT: Panduan Petunjuk Pengoperasian (17 halaman)

Halaman Cetak

1. Introduction

The ALMA desk range has been enriched with design solutions and proposals that respond to

the current needs of flexibility and ergonomics in the modern work environment.

The ability to adjust the height of the working surface ensures maximum fitting of the furniture

to the user. It creates a functional and flexible workspace, while maintaining its unified

aesthetics. The lifting mechanism (motors) is mounted on two vertical supports (lifting units) on

the working desks. The height adjustment of the desk is achieved by selecting the

corresponding keys on the handset. The adjustment range is 640-1290 mm, the maximum

lifting speed is estimated at 35 mm / sec and the lifting capacity is limited to 125 kg.

The following instructions give you a detailed description of the product with reference to the

packaging and the various parts, technical specifications and materials used, as well as its

ergonomic and environmental aspects. Furthermore we provide all the necessary instructions

for the life cycle of the product: from assembly and use to the end of the life cycle. Finally, you

can find a glossary of relevant concepts as well as the assembly plans attached.

Information: Dromeas assumes no liability or warranty for damages and malfunctions

resulting from noncompliance with the operating instructions.

Product description

2.1 Packaging and parts (see Attachement)

All available accessories are listed in the technical description of the product that is published

on the website

https://www.dromeas.com

A wide range of accessories in various materials, surfaces and colors is available for our

products. For detailed information about available system components and additional orders

and subsequent deliveries, please contact Customer Support

visit the online store

https://eshop.dromeas.gr

2.2 Used materials

2.2.1 Packaging

The working desk is packed in a polystyrene carton. For desktop protection, edge and corner

protectors made of PE are used.

2.2.2 Working desk

- Steel sheet ST 37 DCP (cold rolled)

- Chipboard P2 of category E1 and ABS 2 mm perimeter edge banding

- Other plastic parts from PP

- 18 mm multiplex sheet with two-sided HPL coating.

https://www.dromeas.com