Anker A2503 Panduan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Pengisi Daya Baterai Anker A2503. Anker A2503 17 halaman.

Halaman Cetak

LED Indicator

Status

Solid blue for 3 seconds, then off

Connected to power

Solid blue

Charging mobile device

Flashing blue

Metal or abnormal objects detected

Overvoltage protection, indicating you need

Flashing green

to switch to a 5V/9V DC adapter

• You cannot charge your device wirelessly in these scenarios:

using a case with a magnetic/iron plate;

using a case with a pop socket;

using an ultra-thick (> 5 mm) protective phone case.

• Do not place any foreign objects between your device and the

wireless charger's surface, including metal pads on a car mount, credit

cards, door keys, coins, metal, or NFC cards, which will make wireless

charging fail or cause overheating.

• Wireless chargers make charging more convenient than wired

chargers, but confined by current wireless technology, their charging

speed is slower than that of wired chargers.

• High temperatures will reduce charging speed and restrict power,

which is a phenomenon common to all wireless chargers. It is

recommended that you charge your device in environments with

temperatures below 25°C / 77°F.

• Both the protective phone case and the position of your device on the

wireless charger will affect the charging speed. The farther it is placed

from the center of the wireless charger, the slower the charging speed

will be.

Important Safety Instructions

• Avoid dropping.

• Do not disassemble.

• Do not expose to liquids.

• For the safest and fastest charge, use original or certified cables.

• This product is suitable for moderate climates only.

• The maximum ambient temperature during use of this product must not exceed

40°C.

• Open flame sources, such as candles, must not be placed on this product.

• Only use a dry cloth or brush to clean this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the

separation between the equipment and receiver. (3) Connect the equipment into an

outlet on a circuit different from that to which the receiver is connected. (4) Consult

the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance of 20 cm between the radiator & your body.

Product Name: PowerWave Pad

Model: A2503

Anker Innovations Limited

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong