Droper Field 1000 Panduan Petunjuk Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Medis Droper Field 1000. Droper Field 1000 16 halaman. Mechanical pressure infuser
Juga untuk Droper Field 1000: Petunjuk Penggunaan Manual (15 halaman)
Halaman Cetak5. CLEANING / DISINFECTION
The device is made from plastic and metal materials that are not subject to either biodegradation or
corrosion. The device was designed to allow for its full cleaning in the event of any leakage of bodily
fluids, liquids being administered or any other external attack.
While holding the Droper Field 1000 on the flat surface, firmly grip
the mechanism and pull it upwards. This will result in the tightening
clips releasing the mechanism from the base of the casing (see
diagram).
Clean the plate, mechanism and casing separately.
Leave to dry.
5.2
Disinfection
After disassembly and cleaning, the different parts removed according to the procedure described
above in point 5.1 Cleaning can be disinfected by soaking, scrubbing or spraying appropriate products.
Solvent-based disinfectants are prohibited.
Particular attention must however be paid during disinfection operations to ensure no damage is
caused to the mechanism's fasteners.
Do not place in a pressure vessel and avoid abrasive scrubbing which may damage the elements.
5.1
Cleaning
To clean the device, place the Droper Field 1000 on a flat, stable
surface. Open the Droper Field 1000 and pivot the cover
backwards as far as possible. While holding the Droper Field
1000 on the flat surface, firmly grip one of the ends of the plate
and pull it upwards. This will result in the tightening clips
releasing the plate from the mechanism (see diagram).
13 / 16