DROPSA PoliPUMP eco Panduan Pengoperasian dan Pemeliharaan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan Pengguna untuk Pompa Air DROPSA PoliPUMP eco. DROPSA PoliPUMP eco 14 halaman. Multi-line electric pump for grease
Halaman Cetak
7.2 USE
Check the setting data indicated on the control panel (if present);
Press the start button on the machine where the pump is connected;
Ensure that the pump starts;
Ensure the adequate lubrication of the machine (if there are doubts on correct operation, you can contact the Dropsa
S.p.A. Technical Office and ask for the testing procedure).
7.3 FILLING THE RESERVOIR
Check that all the pump housing holes/caps are occupied.
Filling the reservoir is carried out by means of the fully dedicated filter devices. Proceed with filling, ensuring not to exceed
the maximum level line. If this happens, you will note a spill of lubricant from the underside of the lid, which acts as an air
vent.
Loading grease
nipple
ATTENTION: To avoid any malfunctions and to prevent the warranty from becoming void, we recommend
filling the lubricant without impurities, exclusively from dedicated loading system.
Please refer to Section 14.2 Lubricants for the lubricant specifications to be used.
7.4 HOW TO USE
If there are no regulations foreseen, the pump is electrically powered by a system that controls the drive and that handles
the minimum level contact. For the operation of the lubrication system, refer to the machine's management and control
instructions where the pump is installed.
Loading with cartridge
(Part Number 888038)
9