3M PELTOR WS LiteCom Pro III Manual - Halaman 10
Jelajahi secara online atau unduh pdf Manual untuk Headset 3M PELTOR WS LiteCom Pro III. 3M PELTOR WS LiteCom Pro III 20 halaman.
Juga untuk 3M PELTOR WS LiteCom Pro III: Manual Petunjuk Pemasangan (6 halaman)
10.3 Technical Data, Electrical
Power:
The Intrinsic safe models is powered by a rechargeable Li-ion battery pack (
).
x
3.7 V, 1350 mAh
The non intrinsic safe models is powered by a rechargeable Li-ion battery pack (ACK081).
x
3.7 V, 1800 mAh
Operating Time Intrinsic safe models:
Expected operating time (according to standardized measurement) in room temperature with
is:
x
High power: ~12 h
x
Medium power: ~13 h
x
Low power: ~14 h
Operating Time Non Intrinsic safe models:
Expected operating time (according to standardized measurement) in room temperature with ACK081 is:
x
High power: ~16 h
x
Medium power: ~17 h
x
Low power: ~18h
External input:
4-pole connector for external equipment, 3M™ Peltor type J111-A
10.4 Technical data, Radio
Frequency range:
x
406.1 - 470 MHz
Operation mode:
x
Simplex
Antenna:
x
¼ wave, integrated whip antenna, fixed to the headset
x
Omni directional
x
Gain: 2 dBi
Channels:
x
Up to 70 channels
Channel spacing:
x
12,5 kHz and 25 kHz
Modulation:
x
Analog: Max narrow 2,5 kHz (FM), Max wide 5 kHz (FM)
x
Digital: 4-level FSK, 2.5 kHz max deviation.
Receiver sensitivity:
x
Typical -120 dBm
Output power:
x
High power: 200 mW e.r.p
x
Medium power: 20 mW e.r.p
x
Low power: 10 mW e.r.p
© 3M Svenska AB
Värnamo, Sweden