DROPSA nano Progressive Panduan Pengoperasian dan Pemeliharaan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan Pengguna untuk Unit Kontrol DROPSA nano Progressive. DROPSA nano Progressive 9 halaman. Divider
Halaman Cetak4.2 METERING ELEMENT
Metering elements are available with 4 different flow rates. Each nP- Nano Progressive can be assembled with a minimum
of 3 elements and maximum of 12.
PART
Q. cm³
NUMBER
0,025
0645750
0,045
0645751
0,075
0645752
0,105
0645753
It's possible to combine the outlets into a single outlet by element replacing the yellow adaptor (Part number
0641709+0641791) with the white one as shown in the drawing below.
When two outputs are ported internally. Remember to plug the unused port (Part number 3232098).
0641709
It is also possible to combine the flow rates of a metering element with the next metering element in the assembly
by selecting an appropriate bridge metering element.
BRIDGE ELEMENT (The output flow rate is 'bridged' to next metering element as indicated by arrow)
LEFT
CODE
PART NUMBER
nP 025 L
0645754
nP 045 L
0645755
nP 075 L
0645756
nP 105 L
0645757
Each metering device is identified with appropriate marking that shows the output per cycle, for example: "nP 075"
corresponds to 0.075 cm³ output per cycle per outlet.
In the case of a bridge element, the bridging function is also indicated of outputs: "L" left bridge, "R" right bridge,
"LR" left and right bridge.
DESCRIPTION
nP 025-DIVIDERS "nano Progressive"
nP 045- DIVIDERS "nano Progressive"
nP 075- DIVIDERS "nano Progressive"
nP 105- DIVIDERS "nano Progressive"
0641791
10Nm
RIGHT
CODE
nP 025 R
nP 045 R
nP 075 R
nP 105 R
3232098
10Nm
PART NUMBER
0645758
0645759
0645760
0645761
0641708
10Nm
LEFT / RIGHT
CODE
PART NUMBER
nP 025 LR
0645762
nP 045 LR
0645763
nP 075 LR
0645764
nP 105 LR
0645765
3