anko BCW-50A Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Dapur anko BCW-50A. anko BCW-50A 12 halaman. 18 bottle wine cooler
Halaman Cetak
Unplug this apparatus during lightning storms or when unused for long periods of time.
•
This appliance is NOT designed to be installed inside of a cabinet where the front is covered
•
by any type of door.
When positioning the wine cooler, ensure that there is at least a 5cm clearance at the sides
•
and a 10cm clearance at the back of the cooler as this is the main outlet for heat. This will allow
for adequate ventilation. This appliance is designed to be free standing only, and should not be
recessed or built-in.
•
Turn off and unplug before cleaning or storing.
Any type of servicing, apart from ordinary cleaning, must be carried out by an authorised service
•
centre or qualified dealer. There are no user serviceable parts in this appliance.
If this appliance is used by a third party, please supply the instruction manual with it.
•
•
Do not misuse the cord. Never carry the appliance by the cord or pull to disconnect it from the
outlet. Instead, grasp the plug and pull to disconnect.
To fix stably, the appliance must be placed on a flat and solid surface. It should not be laid on
•
any soft material.
Turn off and unplug the unit before moving.
•
•
When positioned or if moving the appliance ensure that it is not set horizontally or declined less
than 45° or turned upside down.
Do not use the unit in very hot or humid places, such as kitchens, bathrooms or under direct
•
sunlight.
This cooler is designed to store wine bottles only. This appliance must not be used to store
•
food.
Do not place hot bottles of wine into the wine cooler. Let it cool down to room temperature first.
•
•
Close the cooler door immediately after putting in any items so the inside temperature will not
rise dramatically.
•
It is not recommended to use this wine cooler with an extension cord or power board.
Do not place any other appliance on top of the wine cooler.
•
•
Do not plug into the power socket before set up is completed.
Please ensure that the appliance is plugged directly into the electrical outlet.
•
An empty cooler can be a dangerous attraction to children. If disposing of the cooler remove
•
gaskets, latches, lids or the entire door from your unused appliance, or take other action to
ensure the cooler is harmless.
No liability can be accepted for any damage caused by non-compliance with these instructions
•
or any other improper use or mishandling of appliance.
•
After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before
placing bottles in the APPLIANCE compartment.
Page 4 of 12