anko FS-688 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Dapur anko FS-688. anko FS-688 17 halaman.

CLEAN AND MAINTENANCE

This appliance should be cleaned after each use.

CAUTION: Do not immerse the crepe maker in water or in a dishwasher!

 Always unplug your crepe maker from the mains power outlet socket before attempting any

cleaning or maintenance.



Ensure that your crepe maker has completely cooled down before cleaning, as it gets very hot

during use.



Using a non-metallic utensil, gently scrape any residue off the surface of the cooking plate and

wipe the surface with a damp cloth.



To remove any stubborn residues, pour a small amount of cooking oil onto the hardened batter.

Allow to set for 5 minutes, and then wipe the softened batter off with a soft cloth.



Do not use coarse scouring pads or steel wool for cleaning as these will damage the surface,

only use products suitable for use on non-stick cooking surfaces.



Use a soft damp cloth to clean the exterior. Dry thoroughly.

STORAGE

1. Unplug the crepe maker from mains power.

2. Allow the appliance to cool down completely.

3. Clean and dry the appliance and accessories.

WARNING! Do not wrap the power cord around the appliance.

4. Store the appliance in a dry location and out of the reach of children.

Voltage: 220-240V~ 50-60Hz

Power: 1200W