anko HX-7830 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Dapur anko HX-7830. anko HX-7830 8 halaman. Salad maker
Halaman Cetak
Place a suitable bowl under the opening of the cone to collect the processed food.
4
Now plug in the socket and insert the prepared food in the feed chute.
5
Press the Start button and keep it pressed. The cone in use then rotates.
6
The food in the feed chute can be inserted into the cone using the pusher. When the feed chute is
7
empty, you can insert more food if necessary.
The processed food falls forwards from the opening of the cone to the bowl placed previously under
the device.
After all prepared foods have been processed; release the Start button.
8
If you want to process larger quantities of food, always observe the short operating time of 1minutes
9
to avoid damaging the salad maker.
10 Remove the mains plug from the socket.
11 To remove the cone, proceed as follows:
Unplug the salad maker. Then rotate the feed chute clockwise until the arrow points to the open lock
on the housing of the salad maker.
Use the thumb and index finger to grip the edge of the inserted cone and feed chute and press them
together as shown in the illustration.