anko HEG40 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kipas angin anko HEG40. anko HEG40 12 halaman. 40cm pedestal fan

3 Assembly

Your Pedestal Fan has been boxed unassembled to minimise packaging waste.

Each part is designed to fit together and be disassembled easily for cleaning or storage.

To assemble the safety grille and blade assembly, take the motor assembly and place

the rear safety grille into position ensuring the safety grille fits onto the locating lugs. If

this is done correctly, the safety grille's carry handle will be at the top.

Fix the rear safety grille into position by replacing the locking nut tightly by hand

Do not over tighten the locking nut.

Rotate clockwise to tighten

Locating Lugs

Place the Fan Blade onto the motor spindle.

Note: The groove in the rear centre of the fan blade aligns with a T-bar on the motor

spindle to ensure correct positioning.

Fix the blade into place by gently hand tightening the spinner anticlockwise onto the

end of the motor spindle. The spinner nut is self-tightening when the motor starts so do

not force it, just nip it up.

Locking Nut

Page 8 of 12

Spinner Nut