anko LD-K9030 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Ketel anko LD-K9030. anko LD-K9030 10 halaman.

IMPORTANT!

* Take care that any steam escaping from the appliance can damage wallpaper, wall

cabinets or other items. Turn the spout away from furniture, walls and overhead cabinets.

* Do not use caustic, aggressive or abrasive cleaning products for cleaning.

Keep hard items away from the appliance.

* Although the kettle is protected from boiling dry, it must never be operated without water.

* If the overheat cut-out switch switches OFF the kettle to prevent overheating and boiling dry,

proceed as follows:

- Remove the kettle from the base.

- Allow the kettle to cool down for at least 15 minutes before refilling it with fresh water and

place the kettle back on the power base.

* Only use the kettle with the power base provided.

* Furniture today is often coated with a wide range of varnishes and plastics and is treated with

various protective substances. Some of these products may contain substances that react

adversely with the rubber feet on the power base, soften them and cause staining on the

surface. Therefore, we recommend placing a non-slip protective mat under the rubber feet of

the kettle.

Unpacking

DANGER to children- danger to life due to suffocation/swallowing of small parts.

Keep the packing material out of children's reach. Dispose them responsibly.

* Carefully remove all parts from the packaging and check that no parts are missing or possibly

damaged when received.

* Remove all packaging material.

First time use

IMPORTANT! During the below process, DO NOT fill the kettle more than the Min. (0.5L)

mark on the kettle. Filling above the Min. mark will cause over boiling and spillage out of

the spout.

To ensure a long service-life of the water kettle, proceed as follows before using it for the first

time:

--USE—