anko 42836933 Buku Petunjuk - Halaman 3
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Furnitur Bayi & Balita anko 42836933. anko 42836933 8 halaman. Wooden cot
Halaman Cetak
To assemble Cot
1
1
Attach both End Panels to one
Side Panel using 4 x 35mm /
1.4in Bolts
Do not tighten bolts completely.
NOTE: Ensure that the bolt
recesses are facing out.
4
4
Slide the Mattress Base between
the End Panels.
Ensure the pre-assembled dowel
in the Mattress Base correctly
inserts into the pre-drilled dowel
hole in the End Panel.
WARNING:
MATTRESS BASE
'THIS SIDE UP' LABEL
MUST BE FACING
UPWARD WHEN
MATTRESS BASE IS
INSTALLED
2
2
Cot should now resemble photo
above.
5
5
Secure the Mattress Base using 4
x 35mm / 1.4in Bolts.
Do not tighten completely.
7
7
Attach the remaining Side Panel
between the End Panels using 4
x 35mm / 1.4in Bolts.
The cot is now ready for use in high base mode.
3
3
Carefully lay the cot down on the
Side Panel.
6
6
Carefully stand the cot upright.
8
Tighten all bolts until firm.
8
Do not over tighten bolts. Over
tightening bolts can cause panels
to crack.
3