anko MC609 Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Penyedot Debu anko MC609. anko MC609 16 halaman. Wet & dry vacuum cleaner for indoor and patio use

Side Clamps

To remove the Upper Motor Housing from the Lower Dust Canister, the two

side clamps need to be unlatched and lifted away from the clamping blocks.

To do this, grasp the lower section of the clamp lever and lift outward and up

then drop down as shown.

To re-clamp, lift and place the clamp back on the clamp blocks, and then

push the clamp lever inward to the vacuum cleaner body until it snaps closed.

6.1

Fit the White Filter which has the Black Foam filter sleeve fitted over it.

To do this, remove the Motor Housing from the Dust Canister by first

unlatching the two side latches as described under the section "Side latches",

and turn the motor housing upside down.

Take the Filter assembly and place it over the Float Post as shown.

Push all the way down and then rotate the filter Clockwise until it locks tight

as shown.

To Remove the Filter Assembly, perform the steps above in reverse order.

IMPORTANT: Ensure all Filters are fitted before use.

Page 7 of 16