anko VC-C001 Manual - Halaman 13

Jelajahi secara online atau unduh pdf Manual untuk Penyedot Debu anko VC-C001. anko VC-C001 16 halaman. Vacuum cleaner with uv lamp for household use only

Halaman Cetak

User Maintenance

NOTE: To maximise the performance of your vacuum cleaner, you should

clean the filters regularly.

Important: Prior to cleaning or other maintenance, the appliance must be

disconnected from the supply mains.

If the filters are broken or worn, replace them before continuing to use the

vacuum.

New filters can be purchased from our Customer Service department. You can

call our customer service number: 1300 105 888 (Australia) and 09 8870 447

(New Zealand), or via email [email protected]

9.1

Cleaning the Filters

Important Note – The Filters must be cleaned regularly for the best suction

performance and to prevent over-heating and damage to your vacuum

cleaner.

Cleaning is best done at the same time when emptying the dust canister after

you have finish vacuuming for the day.

NOTE: Never use the vacuum cleaner with a wet or damp filter or without the

filters fitted.

Using a wet or damp filter will damage the filter, may cause serious damage

to the vacuum cleaner and will void your warranty.

Only wash the white filter if it is very dirty, otherwise just tap the edge of the

filter on the inside of your bin to dislodge any dust and debris, and use the

small brush supplied to help remove the dust and debris.

Wash the Stainless-Steel filter and White filter (if needed) in warm mild soapy

water, rinse in clean fresh cold water and let completely dry.

DO NOT scrub the white filter or place either filter in a dishwasher.

DO NOT use a hair dryer to dry the filters.

The dust canister can also be washed at the same.

Page 13 of 16