anko 42-707-141 Petunjuk Pengoperasian - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Pembicara anko 42-707-141. anko 42-707-141 2 halaman.

Halaman Cetak

Function overview:

Play /

Previous song /

Pause

Phone

Volume down

TF card

USB charging

port

How to use this speaker:

Function Operation

Pause Press

button

Play Press

button

Answer Call Press

button

End Call Press

button

Next Song Long press + button

Previous Song Long press - button

Safety instructions:

Device may become warm while

charging.

2. Do not press the buttons too hard as it

could damage the product.

Next song /

Mode

Power

Volume up

AUX-IN

port

Volume Up Short press + button – when

the volume is adjusted to maximum you

will hear a voice indication tone

Volume Down Short press - button

Change Mode Press

button

Power ON / OFF Press and hold

3. Only use dry cloth to keep product

clean from dust.

4. Do not use chemicals on this product.

Pairing the speaker with

Bluetooth devices

• Once the speaker is turned on, press the

ON/OFF button. Pairing mode is

indicated by the Blue LED flashing

rapidly.

• In the Bluetooth menu on the media

device, search for the speaker's

Bluetooth name: "KM42707141". If

prompted, type the password: "0000" or

"1234" to successfully connect to the

speaker.

• Once the speaker is successfully paired

and connected, the LED will flash slowly

and you can now play music through the

speaker.

Phone calls

When there is an incoming call, the unit will

pause the playback and ring to alert you

of the call. To answer the call, press the

phone button. To end a call, press the

phone button again.

Speciﬁcations:

Model No:

42707141

Version:

V5.0 multimedia hi-ﬁ Bluetooth chipset

Support proﬁles:

A2DP, AVRCP, HFP

Working Distance:

10 Meters

button

Output:

2 x 5W

Music Time:

>5 Hours

Talk time:

>5 Hours

Standby time:

>100 Hours

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc.,

and any use of such marks by KMART AUSTRALIA is under licence.

AUX function

Use the 3.5mm cable to connect your

media device through the AUX-IN port.

When the 3.5mm cable is connected you

can now play music through the speaker.

TF card play

Play music from a TF Card by inserting the

card into the TF card port.

Battery charging

This Bluetooth speaker is powered by a

rechargeable Li-ion battery. Please use

the micro USB cable to recharge the

battery. Plug the micro USB end of cable

into the USB port on the unit and the USB

A end into a PC USB port, wall charger or

other 5V charging device.

Mode button

When multiple media devices are

connected via Bluetooth, AUX or TF you

can cycle through them by pressing the

mode button.

Charging voltage:

5V d.c.

Battery capacity:

2200mAh

Charge time:

4-5 Hours

Pairing window time:

5 Minutes

Non-play automatic power save mode:

After 3 minutes the speaker will enter

power save mode and then automatically

switch o when the low battery alarm

sounds.