anko 42939740 Mulai Cepat Quide - Halaman 5

Jelajahi secara online atau unduh pdf Mulai Cepat Quide untuk Pembicara anko 42939740. anko 42939740 6 halaman. Port bt party speaker

Halaman Cetak

Function Instructions

USB Operation

This speaker has a USB port for play back MP3 music.

1. Insert your USB device into the USB port and the unit will start playing automatically.

Press the [MODE] button to swith to USB mode if the speaker is on other mode.

2.Press the

key to the previous or next track.

3.Press the

button to play or pause music.

FM Operation

This speaker supports FM radio function.

1.Insert the Line In Cable/ FM antenna cable (supplied in the accessories) to the Line

input jack on the rear function panel and extend the cable.

2.Press [ MODE ] button on the rear function panel repeatedly until FM function is selected.

3.Long press

button on the function panel to search the FM radio station automatically.

4.Press

to select the previous or next FM radio station.

Bluetooth Operation

This speaker supports Bluetooth function.

1.Press [ MODE ] button on the function panel switch to the Bluetooth mode if the speaker

on other mode.

2.Once on the Bluetooth mode," bLUE " will keep ﬂashing on the display screen.

3.Open the Bluetooth funciton of the external device and search the Bluetooth device name

"42939740 " to pair.

4.Press connect to "PAIR" with the speaker.

5.Both speakers TWS will pair automatically if above operation correct. Once connected,

" bLUE " will keep static on the display screen, you can play the music with the speaker.

6.You can use

button or

button on rear the function panel to control the songs of the

external device.

TWS Connecting

This speaker supports TWS pairing function, please buy two same speaker to enjoy this

function.

1.Turn on the Bluetooth function of the one speaker, connected the bluetooth and playing

music.

2.Long press MODE button on the rear function panel to open the TWS function, " E ON "

will short display on the screen.

3.Turn on the bluetooth of another speaker and " bLUE " will keep ﬂashing on the screen,

then long press [ MODE ] button of this speaker to open the TWS function, " E ON " will

short display on the screen and "bLUE " will keep static.

4.Both speakers' TWS will pair automatically if above operation correct. Once TWS paired

successully, " bLUE " of both speaker will keep static.

5.Turn the volume knob on the function panel of any speaker increase or decrease the

music volume.

6.If not using the TWS function, please long press [ MODE ] to deconnected TWS, " E OFF "

will short show on the display screen, and " bLUE " will keep ﬂashing on another speaker.

Function Instructions

Connect with Line in

1.Press [ MODE ] button on the rear function panel to switch to the Line in mode," LINE "

will be displayed on the screen.

2.Connect this speaker Line in input jack and the device Earphone jack by provided

Line in cable (supplied in the accessories)

3.Once connected,turn on your external device and play music.

Caution: Please turn off the unit before connect AUX cable in order to avoiding

noise.

Tripod Stand use with the Speaker

1. Please twist loose the knob screw of the ﬁxed mount(#9) on the tripod stand(#5), to loose

the LED tube (#6/#7/# 8) to adjust the size of the ﬁxed position.

2. After twist loosen the knob screw from the ﬁxed mount , please grasp the black centerl

tube (#1) with one hand and push the ﬁxed mount (# 5) with another hand and push it

down; Or grasp any two of LED tubes with both hands (#6/#7/# 8) to pull out，and adjust

a suitable ﬁxed size, then tighten the knob screw of the ﬁxed mount (#9).

3. Loosen the two knob screws on the center tube (#2, #3) to adjust the height of the tripod

stand.

4. After adjusted the height of the tripod stand, please must tighten the knob screws of the

center tube(#2, #3) and insert the pin (#4) to the corresponding hole of the tripod stand

to ﬁx the height, to prevent the center tube fall off.

5. There is a groove at the bottom of the speaker (#10), please correspondingly to place

the speaker on the top of the center tube of the tripod stand, also tighten the knob screw

on the rear of the speaker (#11) to prevent the speaker fall off.

unexpected

#10

#11