anko BL1015-GS Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Blender anko BL1015-GS. anko BL1015-GS 12 halaman.

Resettable fuse button

Function switch: With "Soup" and "Pulse" for selection.

Speed dial: Turn the dial to choose from manual speed settings from "Low" to "High". Once

you select a speed, the blender will run until you turn it back to "STOP".

Tamper: The tamper allows you to accelerate the process of very thick and/or frozen mixtures

that cannot be processed in a regular blender. If food is not circulating the machine may be

overloaded or may have a trapped air bubble. Using the tamper helps to maintain circulation by

preventing air pockets from forming. While the machine is running, remove the measuring cup,

and through the hole in the lid insert the tamper and use it to press ingredients into the blades as

you make frozen ice creams, nut butters, etc.

Resettable fuse button: Incorporated to protect the motor from overheating. If the motor shuts

off while in use: turn Power Switch to "OFF" and unplug from mains power outlet. Remove the

jar from the motor unit and free the blade of any obstructions. Wait 30-45 minutes for the unit

to cool down. Press external resettable fuse button on the bottom of the motor unit.

NOTE:

1) "Function switch" is interlocked with "Speed dial". When operating "Function switch",

"Speed dial" is invalid; and when operating "Speed dial", "Function switch" is invalid.

2) The jar must not be more than 2/3 full when the tamper is used during blending.

3) Do not use tamper for more than 30 consecutive seconds (to avoid overloading the motor).

4) You may need to move the tamper not only up and down, but also side to side.