anko BL9005-CB Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Blender anko BL9005-CB. anko BL9005-CB 7 halaman.
Halaman Cetak
17. To protect against risk of electrical shock do not put motor unit or power cord in
water or other liquid.
18. Do not use outdoors.
19. Keep hands and utensils out of container while blending to reduce the risk of
severe injury to persons or damage to the blender. A scraper may be used but must be
used only when the blender is not running.
20. To reduce the risk of injury, never place cutter-assembly blades on base without
jar properly attached.
21. Always operate blender with the cover in place.
22. Warning: never use hot liquids or run the appliance empty.
Model: BL9005-CB
23. Be care of potential injury from misuse.
24. Care shall be taken when handling the sharp cutting blades, emptying the bowl
and during cleaning.
25. Always disconnect the appliance from the supply if it is left unattended and before
assembling, disassembling or cleaning.
26. Switch off the appliance and disconnect from mains power before changing
accessories or approaching parts that move in use.
27. This appliance is intended to be used in household and similar applications such
as:
– Staff kitchen areas in shops, offices and other working environments;
– Farmhouses;
– By clients in hotels, motels and other residential type environments;
– Bed and breakfast type environments.
IMPORTANT!
Do not blend hot liquids.
Be careful if hot liquid is poured into the blender, it can be ejected out of the
appliance due to sudden steaming.
To prevent damage to the electric motor, the maximum operating time is 30
seconds. Allow it to rest for 1 minute before using it again. After 5 cycles of
operation, allow the blender to cool down to room temperature for approximate
30 minutes before using it again.
Save these instructions
2