Ankom A2000 Prosedur Layanan

Jelajahi secara online atau unduh pdf Prosedur Layanan untuk Alat Ukur Ankom A2000. Ankom A2000 3 halaman. Packing and agitator replacement
Juga untuk Ankom A2000: Manual Penggantian (2 halaman), Prosedur Layanan (2 halaman), Prosedur Layanan (3 halaman)

Halaman Cetak

1. Place cardboard on a table. Lay the A2000 on

it's front. Remove the nuts that secure the clear

back panel. Remove the panel. Remove the

feet and mounting screws, then remove the

bottom panel.

3. Loosen the packing nut until it is finger loose.

5. Unplug the motor wires and set the motor out of

the way.

ANKOM Technology 2052 O'Neil Road Macedon, NY 14502 PH: (315) 986-8090 FAX: (315) 986-8091

Packing and Agitator Replacement

A2000/A2000I

[email protected]

2. Loosen the top set screw on the coupler.

4. Remove the three nuts that secure the motor

bracket in place

6. Twist and pull up to remove the agitator.

002

Service Procedure #

(Page 1 of 3) 08/05/2014