Ankom XT15 Prosedur Layanan

Jelajahi secara online atau unduh pdf Prosedur Layanan untuk Peralatan Laboratorium Ankom XT15. Ankom XT15 5 halaman. Extractor sight glass assembly
Juga untuk Ankom XT15: Pembersihan (4 halaman)

Halaman Cetak

Remove the back cabinet.

a. Remove the eight screws (four on each side of the

instrument) that secure the back cabinet onto the

instrument using a 1/8" Allen wrench. Set aside

the screws for later use.

b. Lift up, then pull back so the handles on each side

slide out of the notched groove.

Remove the front plate by unscrewing the four

attachment screws with a 1/8inch Allen wrench. Set

the screws aside.

ANKOM Technology • 2052 O'Neil Road •

Sight Glass Assembly (X85)

XT15/XT15I

https://www.ankom.com/contact/technical-services

Screws

Notched groove

Front

plate

screws

• Phone: 315-986-8090

#021

Service Procedure

Revised: 11/1/22

pg. 1 of 5