3M XT-1 Buletin Teknis

Jelajahi secara online atau unduh pdf Buletin Teknis untuk Headset 3M XT-1. 3M XT-1 10 halaman. Drive-thru systems
Juga untuk 3M XT-1: Panduan Referensi Cepat (6 halaman), Panduan Referensi Cepat (2 halaman), Data Teknis (2 halaman), Buletin Teknis (2 halaman), Panduan Memulai Cepat (3 halaman), Manual (8 halaman)

3M™ Wireless Communication System Model XT-1

Headset Service Procedures – Using assemblies

Technical Bulletin - #140

The document below

Lists the 3M™ Wireless Communication System Model XT-1 headset assemblies available for servicing (with 3M OEM SKUs)

Describes the standard procedure for conducting break-fix and maintenance tasks on the 3M™ Wireless Communication

System Model XT-1 headset using readily available assemblies from 3M

Only 3M OEM parts (SKU's listed below) should be used for servicing. These procedures should be conducted in a repair center

facility.

3M™ Wireless Communication System Model XT-1 Headset Service Parts – Assemblies

3M™ Wireless Communication System Model XT-1 Headset Standard Break-Fix Service Procedures

1. Replacing the Ear Cup and/or Ear Pad and/or Head Pad and/or Microphone Windscreen.

2. Replacing the Inner Case Assembly, Outer Case Assembly, and Boom Microphone Assembly.

3. Replacing Battery Latch Parts, Battery Latch Spring, or Battery Holder PWA.

4. Replacing the Headband Assembly.

5. Replacing the Indicator LED Lens and the Programming Station IR Lens.