Drucker 642E Panduan Operator
Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Laboratorium Drucker 642E. Drucker 642E 6 halaman. Laboratory centrifuge
Halaman CetakReplacement Parts:
Part No.
Description
7724037
Foot, rubber
7751068
Switch, lid safety
7786061
Rotor, six-place, horizontal
7735049
Motor, 1/30 H.P., 115 V.A.C. permanent split capacitor
7729006
Capacitor, 4uF, 250V A.C.
7717051
Electronic timing and locking board
7751043
Circuit Breaker
7760002
Power cord
7714101
Pawl, latch, lid
7714103
Knob, latch, lid
7724071
Hinge, friction
7732018
Seal, lid gasket
7713031
Red Tube Holder, for 17 mm x 100 mm tubes
7713033
Green Tube Holder, for 17 mm x 75 mm Tubes
02-002-1-0011
Lid Assembly
03-0-0003-0068
Front Panel Label
Available Accessories:
1" Tube cushion
0.25" Tube cushion
p/n 1525
p/n 9150
Shield caps
0.5 to 1 mL
p/n 7713011
Tube Adapter
p/n 7713068
WARRANTY:
The Drucker Diagnostics warranties that this centrifuge is free from
defects in workmanship and parts for 2 years.
Made in the USA by
200 Shady Lane, Suite 170 • Philipsburg, PA 16866
Phone: 814-342-6205 or 814-692-7661 • Fax: 814-692-7662 • www.druckerdiagnostics.com
Protected by U.S. Patents #6,811,531, & #D718463
Other Patents Pending
13 x 75 mm Insert
13 x 100 mm Insert
p/n 7713064
p/n 7713066
1.5 to 2 mL
SmartView™ Platform
p/n 00-179-009-001
Tube Adapter
p/n 7713065
Programmable
Run Time is Factory
10
Preset to
MINUTES
See Page 5
Operator's Manual
Model 642E • Laboratory Centrifuge
Rev. I
P/N 03-0-0002-0039