Drucker Diagnostics Horizon 12 Flex Panduan Operator - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Laboratorium Drucker Diagnostics Horizon 12 Flex. Drucker Diagnostics Horizon 12 Flex 18 halaman.
Juga untuk Drucker Diagnostics Horizon 12 Flex: Panduan Servis (12 halaman)
Halaman Cetak
M
P
ODIFYING A
RESET
Save up to 10 custom cycles. The top screen alternates between cycle name and speed.
Access the Menu
Setting by G-Force
(Recommended)
Setting Speed
Change Brake
Naming the Cycle
Settings Mode
Drucker Diagnostics – Customer Service: +1-814-692-7661 – [email protected] | Page 6
With desired cycle selected, access the menu.
Press and hold the RCF (xg) button while changing the setting,
using the UP and DOWN buttons next to the display. The RPM will
automatically adjust.
To change the speed (RPM), use the UP and DOWN buttons next to
the display. The g-force will adjust automatically and can be
(Alternate)
verified by pressing the RCF button.
Setting Time
Press the UP and DOWN buttons next to the TIME display.
While in the advanced menu, navigate to "Brake". Use the UP and
Values
DOWN buttons next to the TIME screen to turn brake on and off.
While in the advanced menu, navigate to "Beeper". Switch ON or
Turn Beeper
OFF with the UP and DOWN buttons next to the TIME display. This
On or Off
setting will apply to all cycles.
While in the advanced menu, navigate to the cycle name with the
UP and DOWN arrows. Press the START button. The * indicates the
space selected. Use the UP and DOWN buttons to change
characters, then move to the next space with the right arrow >.
Press the GEAR button to return to the main programming menu.
Save and Exit
Press the GEAR button, followed by the CYCLE button to exit
menu.
the