Drucker Diagnostics Horizon 12 Flex Panduan Servis - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Servis untuk Peralatan Laboratorium Drucker Diagnostics Horizon 12 Flex. Drucker Diagnostics Horizon 12 Flex 12 halaman.
Juga untuk Drucker Diagnostics Horizon 12 Flex: Panduan Operator (18 halaman)
Halaman Cetak
Fig 3
•
Insert the Elastomer bushings into the motor mount plate as shown (fig 4).
•
Push the grommets onto the bushings as shown (fig 5).
Fig 6
•
Place one Aluminum spacer 30-000112 onto each stud as shown (fig 6).
•
Install the motor mount assembly onto the guard bowl studs so that the motor
wire tiedown is positioned opposite of the guard bowl splice (fig 7).
•
Install one fender washer onto each stud (fig 8).
•
Finish the assembly with one Nylok nut on each stud, and tighten to 13 in-lbs
DRUCKER DIAGNOSTICS
HORIZON 12 FLEX SERVICE MANUAL
Fig 4
Tiedown
SPLICE
Fig 7
SM028
REV A
Fig 5
Fig 8
8