Absolare Push-Pull Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Absolare Push-Pull. Absolare Push-Pull 15 halaman.
Juga untuk Absolare Push-Pull: Panduan Pengguna (14 halaman)

Halaman Cetak

7. Troubleshooting and Maintenance

Surface of the unit is dirty

No power light

Power light is on but 845 tube heaters

are not glowing

Power light is on, tube heaters are

glowing, but no sound

Noise / hum in the sound

If the problem is persistent, contact your nearest ABSOLARE dealer.

8. Technical Specifications

Zero Feedback, Push-Pull Architecture

Point-to-point construction

Tubes: 2 x 845, 2 x EL34, 1 x 12AT7 / ECC81 (for each unit)

Output power: 85 Watts

Input: 1 x RCA (transformer balanced XLR optional)

Input Sensitivity: 1.5 Volts (balanced input 1.5 / 6 Volts)

Input impedance: 100 kΩ

Speaker impedance: 4 – 8Ω

Bandwidth: 15 Hz – 25 KHz +/- 1.0 dB

Dimensions: 38.2 x 64.8 X 29.7 cm / 15" x 25.5" x 11.7" (W x D x H), excl. feet

Weight: 42 kg / 92 lbs., net (each monoblock)

ABSOLARE Push-Pull Mono Amplifier User Manual 1.2

Clean with a slightly damp cloth.

- Check AC line voltage.

- Check the main fuse.

- Tube orientation is wrong, turn-off unit

immediately and correct the installation.

- Tube(s) are defective.

- Check the input cables, speaker cables

and source.

- Internal fuse for 845 tubes may be

blown out. Call your dealer.

- Check grounding of power, input cables

and source.